# Victron Settings
Rotary switch vs App: last setting change wins
[SmartSolar](https://battlebornbatteries.com/charging-battleborn-lifepo4-batteries/ )
[SmartBMV](https://battlebornbatteries.com/configure-victron-bmv-700-bluetooth-dongle/ )
[relay](https://battlebornbatteries.com/charging-battleborn-lifepo4-batteries/ )
[Lead Acid](https://www.victronenergy.com/media/pg/SmartShunt/en/all-features-and-settings.html )


| 100Ah 12V LiFePO4        | 2x       |
|--------------------------|----------|
| SmartSolar               | MPPT     |
|--------------------------|----------|
| Rotary switch            | 7        | * Leave at 2 and set with App
| Battery voltage          | 12V      |
| Max charge current       | 100A     | * Least of 50 amps per 100 Ah battery or Controller Max
| Charger enabled          | true     |
| Battery preset           | User     |
| Expert mode              | false    |
| Absorption voltage       | 14.40V   |
| Float voltage            | 13.50V   | * Not needed but keep below 13.6
| Equalization voltage     | Disabled | * 13 if cant disable
| Automatic Equalization   | Disabled |
| Temperature compensation | Disabled |
| Low temperature cut-off  | 41F      |
|--------------------------|----------|
| SmartBMV                 | 712      |
|--------------------------|----------|
| Battery capacity         | 200Ah    |
| Charged Voltage          | 14.2V    |
| Discharge floor          | 20%      |
| Tail Current             | 4.00%    |
| Charged detection time   | 3m       |
| Peukert exponent         | 1.05     |
| Charge efficiency factor | 99%      |
| Current threshold        | 0.10A    |
| Time-to-go averaging per | 3m       |
| Battery SOC on reset     | to 100%  |
| Relay mode               | Default  |
| Invert relay             | false    |
| Minimum close time       | 0m       |
| Relay off delay          | 0m       |
| Low SOC relay            | 5%       |
| Clear low SOC relay      | 10%      |
| Low voltage relay        | 11V      |
| Clear low voltage relay  | 12.5V    |
| High voltage relay       | 14.8V    |
| Clear high voltage relay | 14.4V    |



| 50Ah 12V LeadAcid        | 1x       |
|--------------------------|----------|
| SmartSolar               | MPPT     |
|--------------------------|----------|
| Rotary switch            | 2        |
| Battery voltage          | 12V      |
| Max charge current       | 50       |
| Charger enabled          | true     |
| Battery preset           | User     |
| Expert mode              | false    |
| Absorption voltage       | 14.25V   |
| Float voltage            | 13.5     |
| Equalization voltage     | Disabled | * 13 if cant disable
| Automatic Equalization   | Disabled |
| Temperature compensation | Disabled |
| Low temperature cut-off  | 41F      |
|--------------------------|----------|
| SmartBMV                 | 712      |
|--------------------------|----------|
| Battery capacity         | 50Ah     |
| Charged Voltage          | 12.6V    |
| Discharge floor          | 50%      |
| Tail Current             | 4.00%    |
| Charged detection time   | 3m       |
| Peukert exponent         | 1.25     |
| Charge efficiency factor | 95%      |
| Current threshold        | 0.10A    |
| Time-to-go averaging per | 3m       |
| Battery SOC on reset     | to 100%  |
| Relay mode               | Default  |
| Invert relay             | false    |
| Minimum close time       | 0m       |
| Relay off delay          | 0m       |